The EPSON G10 SCARA robots can handle payloads up to 10 kgs with quick cycle times. Thanks to its specially designed rigid arm, it can cover large work areas.
The G10 is an ideal choice for assembly applications, loading and unloading, jobs requiring more than one grippers. Thanks to its 10 kg payload capability, it can lift larger products, so it is ideal for palettizing type applications as well.
Because of its internal cabling, it is considered a compact robot.
|Robot type||4-axis, SCARA robot|
|Payload||nominal / max. (kg)||5 / 10|
|Arm length||arm 1+2 (mm)||650 (250+400)||850 (450+400)|
|Z-axis length (mm)
stand. / clean room
|x=1 180 / 150|
|x=3 420 / 390|
|Max. speed||arm 1+2 (mm/s)||8900||11000|
|Z-axis (mm/s)||standard: 2350
|Repeatability||arm 1+2 (mm)||± 0.025|
|Z-axis (mm)||± 0.010|
|U-axis (°)||± 0.005|
|Inertia||nominal / max. (kg/m2)||0.02 / 0.25|
|Z-axis diameter||outer / inner (mm)||25 H7 / 18|
|Wiring||electrical||D-Sub: 15-pin + 9-pin|
|pneumatic||2 x ø 4 / 2 x ø 6|
cleanroom (ISO3) and ESD
|Mounting holes||4 x ø 16 mm holes
200 x 200 mm
|Weight||(kg)||46 - 53|
|power/signal cable (m)||standard: 3 m
option: 5m, 10m, 20m
|Other options||tool adapter
external wiring unit
Z-axis protection (bellows)
|Standard||RoHS Directive: 2002/92/EC
NFPA 79 (2007 Edition)
CSA/CAN Z434-03 (February 2003)
EC Machinery Directive 2006/42/EC
EPSON robot programming is done in a Windows-based programming environment called
EPSON RC+. The programming language itself is called SPEL+.
SPEL+ is very similar to BASIC. It is quick to learn and easy to understand. After programming and compiling in EPSON RC+, the program is transferred to the robot controller. From that point, the controller controlls the robot (without the need of the PC).
Do you need to control other devices as well? No problem. SPEL+ can do a lot more than just robot control. It is a multitasking language, capable of controlling task parallel or independent of the robot.
SPEL+ includes a wide range ot motion commands: PTP (point-to-point motion), linear motion, CP (continuous path motion), etc. or special motion commands such as Jump or Palletizing commands.
With the use of the 3D robot simulator, you can plan ahead, design and simulate your application before your robot even arrives. Inside EPSON RC+ you can add 3D models to model your robotic cell, and check the cycle times. You can run study and verify your concept ideal before having to manufacture anything.
You can choose form a wide range of camera systems offered by the automation industry. But EPSON also provides its own solution. EPSON's vision systems are integrated with the robot's software, making it easy to connect and to access all the parameters and results of the camera system.
The CV1 (Compact Vision) controller connects to
the robot controller via Ethernet. Programming is done from inside EPSON RC+.
The CV1 supports up to 2 x EPSON USB cameras (VGA, 1.3MP or 5MP).
The CV2 connect to the robot controller via Ethernet connection. The CV2 offers quicker processing and supports high speed GigE cameras for faster data transfers. Programming is done inside EPSON RC+. The CV2 supports up to 4 x GigE cameras and up to 2 x USB cameras at the same time.
The EPSON PV1 is a customizable option. It is installed on a Windows PC, that connects to the robot controller. The processing speed is the function of the hardware used. The PV1 support up to 8 x EPSON GigE cameras which are available in different color modes or resolutions.
Copyright © 2008 - 2018 Arizona Machinery Kft., All Rights Reserved.